Skip to main content

Inspection Checklist - I&C Valve Systems (click link below)

This is an sample of a checklist for inspections of valve, actuator, and positioner systems. 

This is a summary list, but could easily serve to start a comprehensive program to improve I&C maintenance functions of a plant or facility.

Most failures are mechanical in nature - so valves and associated mechanical systems are a high value target for reliability programs, yet most organizations barely scratch the surface on this low hanging fruit of the reliability tree.

Click text link below for access to the 3-page PDF:

Inspection Checklist (Control & Isolation Valves)  

If you have questions about programs like this, or would like ideas or input on your program, reach out to Mike Glass at (208) 715-1590 or via email at [email protected] 

Mike Glass

About the author

Mike Glass

Mike Glass is an ISA Certified Automation Professional (CAP) and a Master Certified Control System Technician (CCST III). Mike has 38 years of experience in the I&C industry performing a mix of startups, field service and troubleshooting, controls integration and programming, tuning & optimization services, and general I&C consulting, as well as providing technical training and a variety of skills-related solutions to customers across North America.

Mike can be reached directly via [email protected] or by phone at (208) 715-1590.